Car Wax
Car Wax & Auto Polish Products
Home > Auto Detail Blog

Friday, September 23, 2005

How To Clean Your Car's Carpet

Cleaning your car's carpet can take a little care and patience, but the end result is well worth it. To clean your car's carpet try and remove as much dirt as possible with vacuuming. Doing this allows your cleaning fluid to lift those embedded stains, instead of just removing dirt.

To clean your car's carpet be sure to vacuum well after using the cleaner.
To clean your car's carpet, look at the level of dirt and grime that need to be cleaned. A foamy cleaner is best if the level of dirt isn't that bad, however for a deeper clean look at using a concentrated dry foam cleaner as it cuts through dirt and grime in seconds.

Try to clean your car's carpet in small sections. Conquer one small area at a time before moving on to other areas to clean your car's carpet. Do not spray more than just the area you are working on at that time, when you clean your car's carpet, by doing so you will remove the dirt more effectively. When using the cleaner to clean your car's carpet, do so sparingly, and do not be too concerned when you clean your car's carpet, if you need to re-apply to a stubborn stain.

Put a little muscle into it when you clean your car's carpet. This is the key to cleaning your car's carpet more effectively, and ridding the carpet of those stubborn stains, and in that case, using a little degreaser is a good idea.. Use a little elbow-grease when you clean your car's carpet, and you will see the dirt coming off. Leaving your carpet clean and stain free, additionally most professional carpet cleaners leave a very pleasant scent after use.

Allow the carpet to dry completely, when you clean your car's carpet.
Use the vacuum again after it is dry to remove any dried, loose dirt. When you clean your car's carpet using professional quality products, and give it a little effort, you will be rewarded with carpet that is clean and stain free.
by Lanes Car Products - Car Wax & Auto Detail Specialists

posted by Lane's Car Products        Share/Save this Post:   del.icio.us YahooMyWeb Furl Spurl TailRank Ma.gnolia blogmarks co.mments Reddit digg NewsVine

-------------------------------------------------------------------------------------------------

Thursday, September 22, 2005

How to Clean and Detail Your Engine

To clean and detail your engine, it is important to cover any sensitive equipment with heavy duty aluminum foil. A hose will work just fine to clean and detail your engine, along with using a couple of professional detailing products, such as a degreaser and engine dressing.

Using a heavy duty engine degreaser is an important step in cleaning and detailing your engine properly and can make this a much easier step. Use a pointy brush to clean your engine, using the brush to get any stubborn deposits off the valve covers etc. You may want to repeat this step to clean and detail your engine, depending on how dirty the engine is.

Once you are satisfied with the degreasing of and have rinsed well. Start up the motor and let it run for a while with the hood down to help dry your engine quickly. The heat of the engine will evaporate a lot of the water. Use the shop vac to blow off any remaining water, have a rag ready to the parts you had covered with the foil to clean and detail your engine. Lowering the hood will help speed the evaporation process to clean and detail your engine.

Now it's degreased and ready for engine dressing, another process to clean and detail your engine. Spray everything really well (except belts). You may want to apply some wax to the painted areas. If you don't want a shiny look when you clean and detail your engine, you can wipe the dressing down, just let it soak in for a while. Protectant liberally applied works well here.
by Lanes Car Products - Car Wax & Auto Detail Specialists

posted by Lane's Car Products        Share/Save this Post:   del.icio.us YahooMyWeb Furl Spurl TailRank Ma.gnolia blogmarks co.mments Reddit digg NewsVine

-------------------------------------------------------------------------------------------------

Tuesday, September 20, 2005

Professional Auto Detail Products vs. Car Products

The Difference Between Professional Auto Detail Products vs. Car products Purchased from Retail Stores

Lane's Professional Auto Detail Products vs. car products purchased from retail stores is not a fair competition. Our professional auto detail products vs. car products purchased from retail stores is in the performance of our products. But, don't take our word for it, try it for yourself, and you decide the difference between our professional auto detail products vs. car products purchased from retail store. We believe you will notice the difference right away.

Put it to the test, the difference between Lane Professional Auto Detail Products vs. car products purchased from retail stores. We get rave reviews from customers who have determined the difference between our professional auto detail products vs. car products purchased from retail stores. We think you will agree with them in the comparison between our professional auto detail products vs. car products purchased from retail stores.

Lane's professional auto detail products vs. car products purchased from retail stores is a difference that is obvious from the start. We offer many fine professional detail products. Start with Lane's Wash & Shine see how impressed you will be after just one use. You will agree that our professional auto detail products vs. car products purchased from retail stores wins hands down, it's name says it all, Wash & Shine. See for yourself the difference between our professional auto detail products vs. car products purchased from retail stores.

If you have ever had the problem of swirl marks then try Lane's Super Cut. As many of our customers will attest, the difference between our professional auto detail products vs. car products purchased from retail stores is obvious. Apply the compound as directed, then give your vehicle a close up inspection, where did the swirl marks go?

It is another amazing difference between Lane's professional auto detail products vs. car products purchased from retail stores.

by Lanes Car Products - Car Wax & Auto Detail Specialists

posted by Lane's Car Products        Share/Save this Post:   del.icio.us YahooMyWeb Furl Spurl TailRank Ma.gnolia blogmarks co.mments Reddit digg NewsVine

-------------------------------------------------------------------------------------------------

Monday, September 19, 2005

How To Remove Swirl Marks

This is a job that requires time and patience to remove swirl marks. Be sure you have the extra time to go through all three steps. Otherwise, you may not be pleased with the outcome.

How to remove swirl marks is a three step process.

Step One: To remove swirl marks you should wash the car. It is crucial to make certain that there is not even one speck of dirt or sand on the finish. Or you will only add to the existing problem to remove swirl marks.

Step Two: Use a low speed polisher with foam pad to remove swirl marks. Polish with a high quality swirl mark remover like Lane's Super Cut. It will remove swirl marks and make you wonder where they ever were. Do this process slowly, rushing will only further your problem to remove swirl marks. Using light pressure move the buffer in a tight figure 8 pattern, taking care not to burn the finish to remove swirl marks. (Do not move the buffer from side to side to remove swirl marks, this will allow the polisher to stop for a brief moment, it can cause burning of the finish, if the buffer is not moving on the finish.)

You may reapply the swirl mark remover as needed to remove swirl marks. But try to keep the foam pad as clean as possible, to better remove swirl marks. It may be necessary to repeat this step to remove swirl marks on some areas. Upon completion of this process use a clean dry towel to dust the finish clean.

Step Three: To remove swirl marks apply a coat of Lane's Gold Edition wax on the entire vehicle. Do this by hand to help in your efforts to completely remove swirl marks. Apply the wax smoothly and evenly, allow about 5-10 minutes between coats. Use a gentle yet firm circular motion to remove swirl marks.

by Lanes Car Products - Car Wax & Auto Detail Specialists

posted by Lane's Car Products        Share/Save this Post:   del.icio.us YahooMyWeb Furl Spurl TailRank Ma.gnolia blogmarks co.mments Reddit digg NewsVine

-------------------------------------------------------------------------------------------------




Lane's Car Products is a division of Fast Lane Mobile Wash & Detail
Copyright © 2001 - 2007 Lane's Car Products
Home   |  About  |  Shipping/Returns  |   Blog  |  Gallery  |  Privacy  |  Site Map  |  Resources
Car Wax
Lane's Car Wax & Products